Funksjes:
- Breedbân
- Hege macht
- Low Insertion Loss
Single directional couplers bestiet út in ynfier en in útfier dêr't ynformaasje kin allinnich wurde oerdroegen yn ien rjochting en net nei de ynfier. One-way couplers wurde faak brûkt foar it beskermjen fan gefoelige gegevens en systemen lykas finansjele gegevens, regear geheimen, militêre yntelliginsje, ensfh Se soargje derfoar dat gegevens wurde allinnich ferwurke en opslein yn feilige omjouwings, beskermjen systemen út malware, firussen, en hackers. Unidirectional couplers kinne wurde ymplementearre basearre op in ferskaat oan technologyen, ynklusyf magnetyske coupling, kapasityf coupling, en optyske coupling. Under harren is optyske keppeling ien fan 'e meast brûkte technologyen, om't it gegevensoerdracht mei hege snelheid en hege feiligens leveret. Ta beslút, de ien-wei-kopper is in wichtich elektroanysk apparaat dat wurdt brûkt om de stream fan ynformaasje te beheinen en de feiligens fan it systeem te beskermjen. Se wurde in protte brûkt yn finansjele, regearing, militêre en oare feiligenssituaasjes.
1. It kin allinnich oerstjoere sinjalen yn ien rjochting en hat goede sinjaal isolaasje.
2. It kin stabyl in fêst sinjaalferlies leverje binnen in bepaald frekwinsjeberik, en meast brûkte koppelingskoeffizienten binne meast 3dB, 6dB, ensfh.
3. Ienfâldige struktuer, lytse grutte, en hege betrouberens.
4. By steat om te wjerstean hege-power sinjalen.
1. Foar testen en mjitting: Unidirectionale koppelers kinne brûkt wurde om sinjaalkrêft en amplitude te testen en te mjitten yn mikrogolfkomponinten of systemen, en ek frekwinsje- en fazeferskillen fan reflektearre sinjalen te detektearjen.
2. Foar macht distribúsje: In unidirectional coupler kin tsjinje as macht divider te fersprieden in ynfier sinjaal oan meardere útfier havens.
3. Brûkt om sinjaal amplitude oan te passen: In unidirectional coupler kin tsjinje as in sinjaal attenuator te passen de sinjaal amplitude troch it kontrolearjen fan de coupling koeffizient.
4. Foar ynterferinsje alignment: Unidirectional couplers kinne brûkt wurde foar ynterferinsje alignment, dat giet it om ynbêde in ynterferinsje sinjaal yn it hifke systeem of apparatuer foar in test syn robúste en betrouberens.
Qualwaveleveret breedbân en hege macht single directional couplers yn in breed berik fan 3kHz to 86GHz. De koppelingen wurde breed brûkt yn in protte tapassingen.
Part Number | Frekwinsje(GHz, min.) | Frekwinsje(GHz, Max.) | Krêft(W) | Koppeling(dB) | Insertion Loss(dB, Max.) | Direktiviteit(dB, min.) | VSWR(Max.) | Connectors | Trochrintiid(wiken) |
---|---|---|---|---|---|---|---|---|---|
QSDC-0.003-100-1-10-S | 3K | 0.1 | 1 | 10±1 | 1.6 | - | 1.35 | SMA | 2~4 |
QSDC-0.009-50-K2-50-NS | 9K | 0.05 | 200 | 50±1 | 0.5 | 16 | 1.2 | SMA&N | 2~4 |
QSDC-0.009-100-2K-50-NS | 9K | 0.1 | 2000 | 50±0,5 | 0.5 | 18 | 1.3 | N&SMA | 2~4 |
QSDC-0.009-250-K6 | 9K | 0.25 | 600 | 50±2 | 0.4 | 16 | 1.2 | SMA&N | 2~4 |
QSDC-0.009-400-K5-50-NS | 9K | 0.4 | 500 | 50±2 | 0.6 | 16 | 1.2 | SMA&N | 2~4 |
QSDC-1-10-K15-20-S | 0.001 | 0.01 | 150 | 20±0,5 | 0.2 | 20 | 1.2 | SMA | 2~4 |
QSDC-1-200-1 | 0.001 | 0.2 | 1 | 10±0,5, 20±0,8 | 0.8 | 18 (typ.) | 1.2 | SMA | 2~4 |
QSDC-5-1000-1-10-S | 0.005 | 1 | 1 | 10±0,8 | 1.4 | 16 | 1.25 | SMA | 2~4 |
QSDC-10-500-50-30-NS | 0.01 | 0.5 | 50 | 30±1 | 0.7 | 20 | 1.3 | SMA&N | 2~4 |
QSDC-10-500-K1-50-NS | 0.01 | 0.5 | 100 | 50±1,5 | 0.2 | 18 | 1.2 | SMA&N | 2~4 |
QSDC-10-1000-K2 | 0.01 | 1 | 200 | 40±1 | 0,45 | 20 | 1.35 | SMA&N | 2~4 |
QSDC-10-6000-R3-16-N | 0.01 | 6 | 0.3 | 16±1,2 | 2.5 | 15 | 1.5 | N | 2~4 |
QSDC-20-100-K6-50-NS | 0.02 | 0.1 | 600 | 50±0,8 | 0.2 | 18 | 1.15 | N&SMA | 2~4 |
QSDC-20-200-K6-55-NS | 0.02 | 0.2 | 600 | 55±1 | 0.15 | 19 | 1.2 | N&SMA | 2~4 |
QSDC-20-200-2K5-55-7S | 0.02 | 0.2 | 2500 | 55±1 | 0.15 | 19 | 1.2 | 7/16DIN(L29)&SMA | 2~4 |
QSDC-20-1000-50 | 0.02 | 1 | 50 | 10,5±1,20±1,5 | 0.84 | 18 | 1.5 | SMA&N | 2~4 |
QSDC-20-1000-K15-50-S | 0.02 | 1 | 150 | 50±1 | 0.4 | 20 | 1.5 | SMA | 2~4 |
QSDC-20-1000-K5-50-N | 0.02 | 1 | 500 | 50±2 | 0.3 | 16 | 1.6 | N | 2~4 |
QSDC-30-500-K2 | 0.03 | 0.5 | 200 | 40±1 | 0.3 | 20 | 1.3 | SMA&N | 2~4 |
QSDC-30-1000-50-20-S | 0.03 | 1 | 50 | 20±1,5 | 0.65 | 20 | 1.5 | SMA | 2~4 |
QSDC-50-1000-K8-50-NS | 0.05 | 1 | 800 | 50±2 | 0.3 | 20 | 1.3 | N&SMA | 2~4 |
QSDC-80-420-50 | 0.08 | 0.42 | 50 | 20±1,40±1 | 0.4 | 20 | 1.25 | N&BNC | 2~4 |
QSDC-80-1000-K1-45-S | 0.08 | 1 | 100 | 45±1 | 0.5 | 8 | 1.3 | SMA | 2~4 |
QSDC-80-1000-K25 | 0.08 | 1 | 250 | 40±1 | 0.3 | 16 | 1.2 | SMA&N | 2~4 |
QSDC-80-1000-K6-60-NS | 0.08 | 1 | 600 | 60±1 | 0.4 | 20 | 1.2 | SMA&N | 2~4 |
QSDC-80-1000-1K-50-NS | 0.08 | 1 | 1000 | 50±1 | 0.3 | 20 | 1.3 | N&SMA | 2~4 |
QSDC-80-1000-1K-60-NS | 0.08 | 1 | 1000 | 60±1 | 0.3 | 18 | 1.6 | SMA&N | 2~4 |
QSDC-80-1000-1K2-50-EN | 0.08 | 1 | 1200 | 50±1 | 0.3 | 18 | 1.3 | SC&N | 2~4 |
QSDC-80-1000-3K5-50-A1N | 0.08 | 1 | 3500 | 50±1 | 0,35 | 15 | 1.3 | IF70(1-5/8″)&N | 2~4 |
QSDC-100-110-10-10-S | 0.1 | 0.11 | 10 | 10±1 | 1 | 20 | 1.2 | SMA | 2~4 |
QSDC-100-520-K6-50-NS | 0.1 | 0.52 | 600 | 50±0,8 | 0.2 | 20 | 1.2 | N&SMA | 2~4 |
QSDC-100-600-K2-40-N | 0.1 | 0.6 | 200 | 40±1 | 0.3 | 18 | 1.3 | N | 2~4 |
QSDC-100-700-10-10-S | 0.1 | 0.7 | 10 | 10±2 | 0.9 | 12 | 1.3 | SMA | 2~4 |
QSDC-130-470-50-6-S | 0.13 | 0.47 | 50 | 6±1,2 | 0.7 | 20 | 1.25 | SMA | 2~4 |
QSDC-180-220-2K-40-NS | 0.18 | 0.22 | 2000 | 40±0,3 | 0.2 | 20 | 1.3 | N&SMA | 2~4 |
QSDC-200-300-K5-40-N | 0.2 | 0.3 | 500 | 40±1,5 | 0.3 | 16 | 1.2 | N | 2~4 |
QSDC-200-700-K2-30-S | 0.2 | 0.7 | 200 | 30±1 | 0.4 | 18 | 1.3 | SMA | 2~4 |
QSDC-200-2000-50-30-S | 0.2 | 2 | 50 | 30±1,5 | 0.8 | 15 | 1.3 | SMA | 2~4 |
QSDC-300-800-50-30-S | 0.3 | 0.8 | 50 | 30±1 | 0.3 | 10 | 1.2 | SMA | 2~4 |
QSDC-300-2400-30 | 0.3 | 2.4 | 30 | 10,20,30 | 1 | 18 | 1.3 | SMA | 2~4 |
QSDC-300-4000-50-30-S | 0.3 | 4 | 50 | 30±1,5 | 1 | 12 | 1.4 | SMA | 2~4 |
QSDC-300-6000-K6 | 0.3 | 6 | 600 | 30±0.9,40±1 | 0.7 | 15 | 1.4 | N&SMA | 2~4 |
QSDC-300-8000-20-20-S | 0.3 | 8 | 20 | 20±1 | 1.3 | 18 | 1.35 | SMA | 2~4 |
QSDC-300-10000-50 | 0.3 | 10 | 50 | 10±2,20±2,30±2 | 2.5 | 8 | 1.6 | SMA | 2~4 |
QSDC-300-18000-30 | 0.3 | 18 | 30 | 6±0.8,10±0.8,20±0.8 | 3 | 13 | 1.4 | SMA | 2~4 |
QSDC-300-26500-30 | 0.3 | 26.5 | 30 | 6±0.9,10±0.9 | 3.5 | 11 | 1.5 | SMA | 2~4 |
QSDC-300-40000-20-30-K | 0.3 | 40 | 20 | 30±1,2 | 4.2 | 10 | 1.7 | 2,92 mm | 2~4 |
QSDC-300-67000-12-20-V | 0.3 | 67 | 12 | 20±2 | 6.1 | 7 | 1.9 | 1,85 mm | 2~4 |
QSDC-350-700-8K-50-7N | 0,35 | 0.7 | 8000 | 50±1,2 | 0.3 | 18 | 1.3 | 7/16 DIN(L29)&N | 2~4 |
QSDC-375-6000-30-30-S | 0.375 | 6 | 30 | 30±1,6 | 0.5 | 18 | 1.25 | SMA | 2~4 |
QSDC-400-600-K8-50-NS | 0.4 | 0.6 | 800 | 50±0,8 | 0.3 | 20 | 1.3 | N&SMA | 2~4 |
QSDC-400-800-K8-40-NS | 0.4 | 0.8 | 800 | 40±1 | 0.3 | 18 | 1.3 | N&SMA | 2~4 |
QSDC-400-1560-30-10-S | 0.4 | 1.56 | 30 | 10±1,2 | 1.1 | 20 | 1.3 | SMA | 2~4 |
QSDC-400-2500-10 | 0.4 | 2.5 | 10 | 10,20,30 | 1 | 18 | 1.3 | SMA | 2~4 |
QSDC-400-2500-K5-50-NS | 0.4 | 2.5 | 500 | 50±1,2 | 0.3 | |8 | 1.3 | N&SMA | 2~4 |
QSDC-400-2700-K2-40-N | 0.4 | 2.7 | 200 | 40±1,5 | 0.5 | 20 | 1.5 | N | 2~4 |
QSDC-400-2700-K4-40-N | 0.4 | 2.7 | 400 | 40±1,2 | 0.4 | 20 | 1.2 | N | 2~4 |
QSDC-400-3000-10-20-S | 0.4 | 3 | 10 | 20±1 | 0.5 | 20 | 1.3 | SMA | 2~4 |
QSDC-400-3000-K3-50-S | 0.4 | 3 | 300 | 50±2,5 | 0.5 | 20 | 1.2 | SMA | 2~4 |
QSDC-400-3900-K1-20-N | 0.4 | 3.9 | 100 | 20±2 | 0.5 | 17 | 1.2 | SMA&N | 2~4 |
QSDC-400-3900-K15-15-NS | 0.4 | 3.9 | 150 | 15±1,5 | 0.5 | 16 | 1.25 | SMA&N | 2~4 |
QSDC-400-3900-K2-39-N | 0.4 | 3.9 | 200 | 39±1,5 | 0.3 | 18 | 1.25 | N | 2~4 |
QSDC-400-4200-K2-40-N | 0.4 | 4.2 | 200 | 40±1,8 | 0,35 | 12 | 1.3 | N | 2~4 |
QSDC-400-6000-20 | 0.4 | 6 | 20 | 5±1,7±1,10±1,20±1 | 2.3 | 12 | 1.4 | N | 2~4 |
QSDC-400-6000-K6 | 0.4 | 6 | 600 | 30±0.8,40±0.9 | 0.6 | 15 | 1.3 | N&SMA | 2~4 |
QSDC-400-8000-K6 | 0.4 | 8 | 600 | 30±0.9,40±1 | 0.7 | 14 | 1.4 | N&SMA | 2~4 |
QSDC-400-8000-K25 | 0.4 | 8 | 250 | 30±0.9,40±1 | 0.7 | 14 | 1.4 | N&SMA | 2~4 |
QSDC-400-18000-50 | 0.4 | 18 | 50 | 10±1,5,20±1,5 | 1.5 | 10 | 1.8 | SMA | 2~4 |
QSDC-400-20000-10-10-S | 0.4 | 20 | 10 | 10±1,5 | 2.5 | 8 | 1.7 | SMA | 2~4 |
QSDC-400-20000-10-20-S | 0.4 | 20 | 10 | 20±1,5 | 1.5 | 8 | 1.5 | SMA | 2~4 |
QSDC-410-490-3K-50-NS | 0.41 | 0.49 | 3000 | 50±0,5 | 0.3 | 20 | 1.3 | N&SMA | 2~4 |
QSDC-450-2500-50-6-S | 0,45 | 2.5 | 50 | 6±1 | 0.8 | 18 | 1.2 | SMA | 2~4 |
QSDC-450-6000-30 | 0,45 | 6 | 30 | 10,20,30 | 1.2 | 12 | 1.5 | SMA | 2~4 |
QSDC-470-860-K5 | 0.47 | 0.86 | 500 | 30±0.75,40±0.75,50±0.75 | 0.3 | 20 | 1.15 | 7/16 DIN | 2~4 |
QSDC-500-1000-30 | 0.5 | 1 | 30 | 10,20,30 | 0.4 | 20 | 1.3 | SMA | 2~4 |
QSDC-500-2000-10-15-S | 0.5 | 2 | 10 | 15±1 | 1 | 18 | 1.3 | SMA | 2~4 |
QSDC-500-2000-30 | 0.5 | 2 | 30 | 10±1, 20±1, 30±1 | 0.8 | 20 | 1.25 | SMA | 2~4 |
QSDC-500-2000-50-6-S | 0.5 | 2 | 50 | 6±0,6 | 0.4 | 20 | 1.25 | SMA | 2~4 |
QSDC-500-2000-50 | 0.5 | 2 | 50 | 10±1, 20±1, 30±1 | 0.4 | 20 | 1.2 | SMA | 2~4 |
QSDC-500-2000-K8-50-NS | 0.5 | 2 | 800 | 50±0,8 | 0.3 | 18 | 1.35 | N&SMA | 2~4 |
QSDC-500-3000-K5-60-NS | 0.5 | 3 | 500 | 60±2 | 0.4 | 16 | 1.4 | SMA&N | 2~4 |
QSDC-500-6000-30 | 0.5 | 6 | 30 | 20±1,30±1,5 | 1 | 18 | 1.4 | SMA | 2~4 |
QSDC-500-6000-K2 | 0.5 | 6 | 200 | 40±2 | 0.6 | 15 | 1.5 | SMA&N | 2~4 |
QSDC-500-6000-K3-40-N | 0.5 | 6 | 300 | 40±2 | 0.6 | 15 | 1.5 | N | 2~4 |
QSDC-500-6000-K6 | 0.5 | 6 | 600 | 30±0,7, 40±0,8 | 0.6 | 15 | 1.3 | N&SMA | 2~4 |
QSDC-500-8000-50 | 0.5 | 8 | 50 | 10±1, 20±1 | 1.2 | 12 | 1.5 | SMA | 2~4 |
QSDC-500-8000-K25 | 0.5 | 8 | 250 | 30±0,8, 40±0,9 | 0.5 | 14 | 1.4 | N&SMA | 2~4 |
QSDC-500-8000-K6 | 0.5 | 8 | 600 | 30±0,8, 40±0,9 | 0.7 | 14 | 1.4 | N&SMA | 2~4 |
QSDC-500-8500-K1-40-N | 0.5 | 8.5 | 100 | 40±2, 41±3,5 | 0.5 | 12 | 1.5 | N | 2~4 |
QSDC-500-12000-80-20-S | 0.5 | 12 | 80 | 20±1 | 1 | 12 | 1.6 | SMA | 2~4 |
QSDC-500-18000-50 | 0.5 | 18 | 50 | 10±1, 20±1, 30±1,5, 20±0,6, 30±1,8 | 1.8 | 10 | 1.6 | SMA&N | 2~4 |
QSDC-500-18000-30-6-S | 0.5 | 18 | 30 | 6±0,8 | 2.6 | 14 | 1.5 | SMA | 2~4 |
QSDC-500-18000-K25 | 0.5 | 18 | 250 | 30±1,2, 40±1,2 | 1 | 10 | 1.6 | N&SMA | 2~4 |
QSDC-500-18000-K4 | 0.5 | 18 | 400 | 30±1,2, 40±1,2 | 1 | 10 | 1.6 | N&SMA | 2~4 |
QSDC-500-18500-20-10-S | 0.5 | 18.5 | 20 | 10±1 | 1.6 | 10 | 1.6 | SMA | 2~4 |
QSDC-500-26500-30 | 0.5 | 26.5 | 30 | 6±0.8, 10±1.8, 20±1.8, 30±2.5 | 2.9 | 13 | 1.7 | SMA | 2~4 |
QSDC-500-40000-20 | 0.5 | 40 | 20 | 6±1, 10±1, 20±1 | 3.9 | 10 | 1.7 | 2,92 mm | 2~4 |
QSDC-500-50000-20 | 0.5 | 50 | 20 | 10±1,2, 20±1,2 | 3.6 | 8 | 1.8 | 2,4 mm | 2~4 |
QSDC-600-2700-K4-40-N | 0.6 | 2.7 | 400 | 40±1,5 | 0.3 | 20 | 1.15 | N | 2~4 |
QSDC-600-2700-3K-50-7S | 0.6 | 2.7 | 3000 | 50±1,5 | 0,45 | 16 | 1.35 | 7/16DIN(L29)&SMA | 2~4 |
QSDC-600-3000-K2-20-NS | 0.6 | 3 | 200 | 20±1,2 | 0.7 | 16 | 1.35 | SMA&N | 2~4 |
QSDC-600-3000-K5-40-NS | 0.6 | 3 | 500 | 40±1 | 0,35 | 16 | 1.5 | SMA&N | 2~4 |
QSDC-600-3900-50-10-S | 0.6 | 3.9 | 50 | 10±1,5 | 0.5 | 18 | 1.2 | SMA | 2~4 |
QSDC-600-3900-50-20-S | 0.6 | 3.9 | 50 | 20±1,5 | 0.5 | 12 | 1.2 | SMA | 2~4 |
QSDC-600-6000-50 | 0.6 | 6 | 50 | 10±1, 20±1,2, 30±1 | 1 | 15 | 1.3 | SMA | 2~4 |
QSDC-600-40000-30-10-K | 0.6 | 40 | 30 | 10±2,8 | 3.8 | 8 | 1.8 | 2,92 mm | 2~4 |
QSDC-698-960-K25-50-NS | 0.698 | 0.96 | 250 | 50±0,7 | 0.3 | 23 | 1.3 | N&SMA | 2~4 |
QSDC-698-960-K5-50-NS | 0.698 | 0.96 | 500 | 50±0,7 | 0.3 | 18 | 1.3 | N&SMA | 2~4 |
QSDC-700-2700-50-30-S | 0.7 | 2.7 | 50 | 30±1 | 0.4 | 20 | 1.25 | SMA | 2~4 |
QSDC-700-6000-50 | 0.7 | 6 | 50 | 20±1 | 1 | 16 | 1.3 | SMA&N | 2~4 |
QSDC-700-6000-K6 | 0.7 | 6 | 600 | 30±0,7, 40±0,7 | 0.4 | 15 | 1.3 | N&SMA | 2~4 |
QSDC-700-18000-K25 | 0.7 | 18 | 250 | 30±1,2, 40±1,2 | 0.9 | 10 | 1.6 | N&SMA | 2~4 |
QSDC-800-2700-50-10-S | 0.8 | 2.7 | 50 | 10±1 | 1 | 18 | 1.2 | SMA | 2~4 |
QSDC-800-3000-K8-50-NS | 0.8 | 3 | 800 | 50±1,2 | 0.3 | 20 | 1.3 | N&SMA | 2~4 |
QSDC-800-3500-K2-40-N | 0.8 | 3.5 | 200 | 40±1,5 | 0,35 | 18 | 1.4 | N | 2~4 |
QSDC-800-12750-K1-10-N | 0.8 | 12.75 | 100 | 10±1 | 1.3 | 15 | 1.4 | N | 2~4 |
QSDC-800-12750-K1-10-S | 0.8 | 12.75 | 100 | 10±1 | 1.3 | 15 | 1.4 | SMA | 2~4 |
QSDC-910-920-K3-30-S | 0.91 | 0.92 | 300 | 30±0,5 | 0.2 | 20 | 1.2 | SMA | 2~4 |
QSDC-1000-2000-K8-50-NS | 1 | 2 | 800 | 50±0,8 | 0.2 | 20 | 1.3 | N&SMA | 2~4 |
QSDC-1000-3000-K5-50-NS | 1 | 3 | 500 | 50±1,2 | 0,35 | 18 | 1.3 | N&SMA | 2~4 |
QSDC-1000-4000-30 | 1 | 4 | 30 | 10, 20, 30 | 1 | 20 | 1.3 | SMA | 2~4 |
QSDC-1000-4000-50-20-S | 1 | 4 | 50 | 20±1 | 0.5 | 18 | 1.3 | SMA | 2~4 |
QSDC-1000-6000-K1 | 1 | 6 | 100 | 10±0,8, 15±1,5 | 0.8 | 10 | 1.4 | N | 2~4 |
QSDC-1000-6000-K3-30-NS | 1 | 6 | 300 | 30±1,5 | 0.6 | 16 | 1.35 | N&SMA | 2~4 |
QSDC-1000-6000-K1-40-NS | 1 | 6 | 100 | 40±1 | 0.4 | 12 | 1.8 | N&SMA | 2~4 |
QSDC-1000-6000-K6 | 1 | 6 | 600 | 30±0,7, 40±0,7 | 0.5 | 15 | 1.3 | N&SMA | 2~4 |
QSDC-1000-8000-30-30-S | 1 | 8 | 30 | 30±1,2 | 0.8 | 15 | 1.5 | SMA | 2~4 |
QSDC-1000-12400-30-20-S | 1 | 12.4 | 30 | 20±1 | 0.87 | 15 | 1.5 | SMA | 2~4 |
QSDC-1000-18000-30 | 1 | 18 | 30 | 6±0.6, 10±1, 16±1, 20±1, 30 | 2.5 | 10 | 1.6 | SMA&N | 2~4 |
QSDC-1000-18000-50-10-S | 1 | 18 | 50 | 10±1 | 1.2 | 12 | 1.6 | SMA | 2~4 |
QSDC-1000-18000-50-20-S | 1 | 18 | 50 | 20±1 | 1.2 | 12 | 1.6 | SMA | 2~4 |
QSDC-1000-18000-K25 | 1 | 18 | 250 | 30±1,2, 40±1,2 | 0.8 | 10 | 1.6 | N&SMA | 2~4 |
QSDC-1000-18000-K4 | 1 | 18 | 400 | 30±1,2, 40±1,2 | 0.8 | 10 | 1.6 | N&SMA | 2~4 |
QSDC-1000-26500-30-20-S | 1 | 26.5 | 30 | 20±1,5 | 2.2 | 10 | 1.7 | SMA | 2~4 |
QSDC-1000-26500-30 | 1 | 26.5 | 30 | 6±0,7, 10±0,5, 30±0,8 | 2.8 | 13 | 1.6 | SMA | 2~4 |
QSDC-1000-40000-20 | 1 | 40 | 20 | 6±0,8, 30±1,2 | 3.8 | 9 | 1.7 | 2,92 mm | 2~4 |
QSDC-1000-40000-30 | 1 | 40 | 30 | 10±1,2, 16±1,5, 20±1,2 | 2.8 | 10 | 1.7 | 2,92 mm | 2~4 |
QSDC-1000-50000-30 | 1 | 50 | 30 | 10±2, 20±2,5 | 2.8 | 10 | 1.7 | 2,4 mm | 2~4 |
QSDC-1000-67000-20-10-V | 1 | 67 | 20 | 10±3,5 | 3.8 | 8 | 1.9 | 1,85 mm | 2~4 |
QSDC-1200-1400-1K-50-7S | 1.2 | 1.4 | 1000 | 50±0,5 | 0.3 | 25 | 1.3 | 7/16DIN(L29)&SMA | 2~4 |
QSDC-1290-1310-70 | 1.29 | 1.31 | 70 | 6±1, 10±1 | 1.8 | 20 | 1.3 | N | 2~4 |
QSDC-1290-1310-K1 | 1.29 | 1.31 | 100 | 6±1, 10±1, 20±1 | 1.8 | 20 | 1.3 | N | 2~4 |
QSDC-1400-1900-K5-50-NS | 1.4 | 1.9 | 500 | 50±0,6 | 0.3 | 23 | 1.3 | N&SMA | 2~4 |
QSDC-1700-2200-K25-50-NS | 1.7 | 2.2 | 250 | 50±0,4 | 0.3 | 20 | 1.3 | N&SMA | 2~4 |
QSDC-1800-2200-K5-43-NS | 1.8 | 2.2 | 500 | 43±0,4 | 0.3 | 18 | 1.3 | N&SMA | 2~4 |
QSDC-1800-2200-K5-50-NS | 1.8 | 2.2 | 500 | 50±0,4 | 0.3 | 18 | 1.3 | N&SMA | 2~4 |
QSDC-2000-2500-K5-40-NS | 2 | 2.5 | 500 | 40 | 0.4 | 15 | 1.4 | SMA&N | 2~4 |
QSDC-2000-3000-50-20-S | 2 | 3 | 50 | 20 | 0.5 | 20 | 1.25 | SMA | 2~4 |
QSDC-2000-4000-50 | 2 | 4 | 50 | 10±1, 20±1, 30±1, 30±0,8 | 1 | 18 | 1.25 | SMA&N | 2~4 |
QSDC-2000-4000-K3-20-NS | 2 | 4 | 300 | 20±1 | 0.4 | 18 | 1.35 | SMA&N | 2~4 |
QSDC-2000-4000-K4-40-N | 2 | 4 | 400 | 40±1,5 | 0.5 | 10 | 1.3 | N | 2~4 |
QSDC-2000-4000-K4-40-NS | 2 | 4 | 400 | 40±1,2 | 0.5 | 10 | 1.3 | N&SMA | 2~4 |
QSDC-2000-4000-K5-50-NS | 2 | 4 | 500 | 50±1,5 | 0.4 | 20 | 1.25 | SMA&N | 2~4 |
QSDC-2000-4200-1K-40-7S | 2 | 4.2 | 1000 | 40±0,8 | 0.3 | 15 | 1.4 | 7/16DIN(L29)&SMA | 2~4 |
QSDC-2000-5000-1K-50-7S | 2 | 5 | 1000 | 50±1,5 | 0.3 | 10 | 1.5 | 7/16DIN(L29)&SMA | 2~4 |
QSDC-2000-6000-50-30-S | 2 | 6 | 50 | 30±1,2 | 0.5 | 15 | 1.3 | SMA | 2~4 |
QSDC-2000-6000-K25-40-NS | 2 | 6 | 250 | 40±2 | 0.6 | 11.5 | 1.3 | SMA&N | 2~4 |
QSDC-2000-6000-K3-40-NS | 2 | 6 | 300 | 40±0,5 | 0.3 | 16 | 1.3 | N&SMA | 2~4 |
QSDC-2000-6000-K4-45-NS | 2 | 6 | 400 | 45±1,5 | 0.5 | 10 | 1.5 | N&SMA | 2~4 |
QSDC-2000-6000-K6 | 2 | 6 | 600 | 30±0,7, 40±0,7 | 0.4 | 15 | 1.3 | N&SMA | 2~4 |
QSDC-2000-6500-K3-20-NS | 2 | 6.5 | 300 | 20±1,5 | 0.5 | - | 1.5 | N&SMA | 2~4 |
QSDC-2000-8000-10-10-N | 2 | 8 | 10 | 10±1,0 | 0.8 | 15 | 1.25 | N | 2~4 |
QSDC-2000-8000-50 | 2 | 8 | 50 | 6±1, 10±1, 20±1, 30±1 | 1.2 | 18 | 1.3 | SMA | 2~4 |
QSDC-2000-8000-K25 | 2 | 8 | 250 | 30±0,8, 40±0,8 | 0.4 | 14 | 1.4 | N&SMA | 2~4 |
QSDC-2000-8000-K5-30-NS | 2 | 8 | 500 | 30±1 | 0.6 | 14 | 1.5 | SMA&N | 2~4 |
QSDC-2000-8000-K6 | 2 | 8 | 600 | 30±0,8, 40±0,8 | 0.4 | 14 | 1.4 | N&SMA | 2~4 |
QSDC-2000-12000-30-10-S | 2 | 12 | 30 | 10 | 1.1 | 12 | 1.5 | SMA | 2~4 |
QSDC-2000-18000-30 | 2 | 18 | 30 | 10, 20, 30 | 1 | 10 | 1.6 | SMA | 2~4 |
QSDC-2000-18000-30-6-S | 2 | 18 | 30 | 6±0,6 | 2.3 | 15 | 1.6 | SMA | 2~4 |
QSDC-2000-18000-50-10-S | 2 | 18 | 50 | 10±1 | 0.7 | 12 | 1.5 | SMA | 2~4 |
QSDC-2000-18000-50-20-S | 2 | 18 | 50 | 20±1 | 0.7 | 12 | 1.5 | SMA | 2~4 |
QSDC-2000-18000-K2-50-NS | 2 | 18 | 200 | 50±2 | 0.6 | 10 | 1.6 | SMA&N | 2~4 |
QSDC-2000-18000-K25-40-NS | 2 | 18 | 250 | 40±1 | 0.6 | 10 | 1.6 | SMA&N | 2~4 |
QSDC-2000-18000-K4 | 2 | 18 | 400 | 30±1, 40±1 | 0.6 | 10 | 1.6 | N&SMA | 2~4 |
QSDC-2000-26500-30 | 2 | 26.5 | 30 | 6±0.7, 10±0.5, 16±1.5, 20±0.5, 30±0.6 | 2.6 | 12 | 1.7 | SMA | 2~4 |
QSDC-2000-40000-20 | 2 | 40 | 20 | 6±0,8 | 3.6 | 10 | 1.7 | 2,92 mm | 2~4 |
QSDC-2000-40000-30 | 2 | 40 | 30 | 10±1,5, 16±1,2, 20±1,5, 30±1,5 | 2 | 10 | 1.7 | 2,92 mm | 2~4 |
QSDC-2000-50000-20 | 2 | 50 | 20 | 10±2, 20±2 | 2 | 10 | 1.8 | 2,4 mm | 2~4 |
QSDC-2000-67000-10-16-V | 2 | 67 | 10 | 16±4 | 3.5 | 8 | 2 | 1,85 mm | 2~4 |
QSDC-2000-67000-12-10-V | 2 | 67 | 12 | 10±1,2 | 2.7 | 7 | 1.9 | 1,85 mm | 2~4 |
QSDC-2200-2300-20 | 2.2 | 2.3 | 20 | 10±1, 20±1 | 0.5 | 20 | 1.3 | N | 2~4 |
QSDC-2200-2300-K5-43-NS | 2.2 | 2.3 | 500 | 43±0,3 | 0.3 | 16 | 1.3 | N&SMA | 2~4 |
QSDC-2300-2600-K5-40-NS | 2.3 | 2.6 | 500 | 40±0,5 | 0.4 | 20 | 1.25 | SMA&N | 2~4 |
QSDC-2300-2700-K25-50-NS | 2.3 | 2.7 | 250 | 50±0,4 | 0.3 | 23 | 1.3 | N&SMA | 2~4 |
QSDC-2300-2700-K5-50-NS | 2.3 | 2.7 | 500 | 50±0,4 | 0.3 | 18 | 1.3 | N&SMA | 2~4 |
QSDC-2500-6000-50-6-S | 2.5 | 6 | 50 | 6±1 | 0.8 | 20 | 1.2 | SMA | 2~4 |
QSDC-2700-3100-K2-40-NS | 2.7 | 3.1 | 200 | 40±2 | 0.3 | 18 | 1.3 | SMA&N | 2~4 |
QSDC-2700-3500-1K5-50-7S | 2.7 | 3.5 | 1500 | 50±0,8 | 0,35 | 16 | 1.3 | 7/16DIN(L29)&SMA | 2~4 |
QSDC-3000-6000-10-20-S | 3 | 6 | 10 | 20±1 | 0.5 | 18 | 1.3 | SMA | 2~4 |
QSDC-3300-3800-K2-10-N | 3.3 | 3.8 | 200 | 10±0,4 | 0.3 | 10 | 1.3 | N | 2~4 |
QSDC-3300-3800-K2-30-N | 3.3 | 3.8 | 200 | 30±0,4 | 0.3 | 10 | 1.3 | N | 2~4 |
QSDC-3300-3800-K5-50-NS | 3.3 | 3.8 | 500 | 50±0,4 | 0.3 | 15 | 1.3 | N&SMA | 2~4 |
QSDC-3400-4200-50-30-S | 3.4 | 4.2 | 50 | 30±1 | 0.5 | 15 | 1.3 | SMA | 2~4 |
QSDC-3500-4500-10-20-S | 3.5 | 4.5 | 10 | 20±1 | 0.5 | 20 | 1.3 | SMA | 2~4 |
QSDC-3800-4300-50-20-N | 3.8 | 4.3 | 50 | 20±1 | 0.5 | 20 | 1.3 | N | 2~4 |
QSDC-4000-6000-K4-40-N | 4 | 6 | 400 | 40±1,5 | 0.6 | 10 | 1.3 | SMA&N | 2~4 |
QSDC-4000-8000-50-10-S | 4 | 8 | 50 | 10±1 | 1 | 16 | 1.3 | SMA | 2~4 |
QSDC-4000-12000-50-6-S | 4 | 12 | 50 | 6±1 | 1.2 | 12 | 1.5 | SMA | 2~4 |
QSDC-4000-16000-30-10-S | 4 | 16 | 30 | 10±1,2 | 1.2 | 12 | 1.5 | SMA | 2~4 |
QSDC-4000-18000-20 | 4 | 18 | 20 | 10±1, 20±1, 30±1 | 1 | 10 | 1.5 | SMA | 2~4 |
QSDC-4000-18000-K3 | 4 | 18 | 300 | 30±1,5, 40±1,5 | 0.9 | 6 | 1.4 | N&SMA | 2~4 |
QSDC-4000-20000-20-20-N | 4 | 20 | 20 | 20±1 | 0.6 | 10 | 1.6 | SMA | 2~4 |
QSDC-4000-30000-30-20-K | 4 | 30 | 30 | 20±1 | 1.5 | 12 | 1.6 | 2,92 mm | 2~4 |
QSDC-4000-50000-20-10-2 | 4 | 50 | 20 | 10±2 | 2 | 10 | 1.8 | 2,4 mm | 2~4 |
QSDC-5900-7500-K15-40-NS | 5.9 | 7.5 | 150 | 40±0,8 | 0.6 | 12 | 1.5 | N&SMA | 2~4 |
QSDC-6000-10000-K12-40-NS | 6 | 10 | 120 | 40±0,5 | 0.3 | 15 | 1.4 | N&SMA | 2~4 |
QSDC-6000-18000-30-6-S | 6 | 18 | 30 | 6±0,5 | 2 | 15 | 1.4 | SMA | 2~4 |
QSDC-6000-18000-50 | 6 | 18 | 50 | 10±1, 20±1, 30±1 | 1 | 12 | 1.5 | SMA | 2~4 |
QSDC-6000-18000-50-10-S-1 | 6 | 18 | 50 | 10±0,6 | 0.6 | 12 | 1.5 | SMA | 2~4 |
QSDC-6000-18000-50-20-S-1 | 6 | 18 | 50 | 20±0,5 | 0.6 | 15 | 1.4 | SMA | 2~4 |
QSDC-6000-18000-80-35-S | 6 | 18 | 80 | 35±1 | 0.5 | 10 | 1.5 | SMA | 2~4 |
QSDC-6000-18000-K2-30-NS | 6 | 18 | 200 | 30±1,5 | 0.5 | 10 | 1.8 | SMA&N | 2~4 |
QSDC-6000-18000-K25 | 6 | 18 | 250 | 30±1, 40±2 | 0.5 | 10 | 1.8 | N&SMA | 2~4 |
QSDC-6000-18000-K35-40-D650S | 6 | 18 | 350 | 40±0,75 | 0.3 | 12 | 1.25 | WRD-650&SMA | 2~4 |
QSDC-6000-18000-K4-40-NS | 6 | 18 | 400 | 40±1 | 0.5 | 10 | 1.6 | SMA&N | 2~4 |
QSDC-6000-18200-30 | 6 | 18.2 | 30 | 6±1, 10±1, 30±1 | 1.2 | 12 | 1.5 | SMA | 2~4 |
QSDC-6000-26500-30 | 6 | 26.5 | 30 | 6±0.6, 10±0.6, 20±0.5, 30±0.7 | 2.3 | 13 | 1.5 | SMA | 2~4 |
QSDC-6000-40000-20 | 6 | 40 | 20 | 6±0.8, 10±0.7, 20±0.7, 30±0.7 | 2.6 | 10 | 1.7 | 2,92 mm | 2~4 |
QSDC-6000-50000-20-10-2 | 6 | 50 | 20 | 10±0,8 | 1.9 | 8 | 1.8 | 2,4 mm | 2~4 |
QSDC-6000-67000-12-10-V | 6 | 67 | 12 | 10±1.1 | 2.5 | 7 | 1.9 | 1,85 mm | 2~4 |
QSDC-6100-7000-50-10-S | 6.1 | 7 | 50 | 10±0,15 | 0.5 | 20 | 1.2 | SMA | 2~4 |
QSDC-6500-11500-20-20-S | 6.5 | 11.5 | 20 | 20±1 | 1 | 12 | 1.5 | SMA | 2~4 |
QSDC-7000-7300-60-30-S | 7 | 7.3 | 60 | 30±1 | 0.5 | 16 | 1.5 | SMA | 2~4 |
QSDC-7000-12400-50 | 7 | 12.4 | 50 | 10±1, 20±1, 30±1 | 1 | 12 | 1.5 | SMA | 2~4 |
QSDC-8000-8400-20 | 8 | 8.4 | 20 | 10±1, 20±1 | 1 | 12 | 1.6 | N | 2~4 |
QSDC-8000-12000-40-15-S | 8 | 12 | 40 | 15±1 | 0.8 | 12 | 1.5 | SMA | 2~4 |
QSDC-8000-12000-K2-37.5-NS | 8 | 12 | 200 | 37,5±0,8 | 0.7 | 13 | 1.3 | N&SMA | 2~4 |
QSDC-8000-12400-K1-30-N | 8 | 12.4 | 100 | 30±1 | 0.4 | 10 | 1.4 | N | 2~4 |
QSDC-8000-18000-10-10-N | 8 | 18 | 10 | 10±1,2 | 1 | 12 | 1.5 | N | 2~4 |
QSDC-8000-18000-50-30-N | 8 | 18 | 50 | 30±1,8 | 0.6 | 12 | 1.5 | N | 2~4 |
QSDC-10750-12750-50 | 10.75 | 12.75 | 50 | 20±1, 30±1 | 0.6 | 15 | 1.4 | SMA | 2~4 |
QSDC-10900-13500-12-30-S | 10.9 | 13.5 | 12 | 30±1,2 | 0.6 | 17 | 17 | SMA | 2~4 |
QSDC-11900-18000-2K-40-62 | 11.9 | 18 | 2000 | 40±1 | 0.3 | 20 | 1.3 | WR-62 (BJ140) | 2~4 |
QSDC-12000-13000-10-6-S | 12 | 13 | 10 | 6±1 | 0.8 | 12 | 1.5 | SMA | 2~4 |
QSDC-12000-18000-50-30-S | 12 | 18 | 50 | 30±1 | 1 | 12 | 1.5 | SMA | 2~4 |
QSDC-12400-18000-50 | 12.4 | 18 | 50 | 10±1, 20±1 | 0.8 | 12 | 1.4 | SMA | 2~4 |
QSDC-14000-15000-50 | 14 | 15 | 50 | 10±1, 20±1 | 0.6 | 15 | 1.4 | SMA | 2~4 |
QSDC-17000-22000-30-20-S | 17 | 22 | 30 | 20±1 | 1 | 14 | 1.5 | SMA | 2~4 |
QSDC-18000-26500-30-6-S | 18 | 26.5 | 30 | 6±0,5 | 2.3 | 14 | 1.5 | SMA | 2~4 |
QSDC-18000-31000-30-20-K | 18 | 31 | 30 | 20±1 | 1.4 | 12 | 1.6 | 2,92 mm | 2~4 |
QSDC-18000-40000-20-6-K | 18 | 40 | 20 | 6±0,7 | 2.6 | 12 | 1.7 | 2,92 mm | 2~4 |
QSDC-18000-40000-30 | 18 | 40 | 30 | 10±1, 20±1, 30±1 | 1.6 | 10 | 1.6 | 2,92 mm | 2~4 |
QSDC-18000-50000-20 | 18 | 50 | 20 | 10±0,7, 20±0,8 | 1.8 | 8 | 1.8 | 2,4 mm | 2~4 |
QSDC-18000-67000-12-10-V | 18 | 67 | 12 | 10±1 | 2.5 | 7 | 1.9 | 1,85 mm | 2~4 |
QSDC-20000-50000-10 | 20 | 50 | 10 | 10±1,2, 20±1,2, 30±1,2 | 1.8 | 8 | 1.9 | 2,4 mm | 2~4 |
QSDC-26000-30000-30 | 26 | 30 | 30 | 10±1, 20±1, 30±1 | 1.6 | 12 | 1.6 | 2,92 mm | 2~4 |
QSDC-26000-40000-K1-30-28K | 26 | 40 | 100 | 30±1 | 0.3 | 25 | 1.1 | WR-28(BJ320) en 2,92 mm | 2~4 |
QSDC-26500-40000-20-6-K | 26.5 | 40 | 20 | 6±0,7 | 2.6 | 12 | 1.7 | 2,92 mm | 2~4 |
QSDC-26500-67000-12-10-V | 26.5 | 67 | 12 | 10±1 | 2.5 | 7 | 1.9 | 1,85 mm | 2~4 |
QSDC-40000-67000-12-10-V | 40 | 67 | 12 | 10±1 | 2.5 | 7 | 1.9 | 1,85 mm | 2~4 |
QSDC-65000-86000-20-10-1 | 65 | 86 | 20 | 10±3 | 2 | 12 | 2.5 | 1.0mm | 2~4 |