Funksjes:
- Breedbân
- Lytse Grutte
- Low Insertion Loss
De 3-way power divider / combiner is in apparaat dat in protte wurdt brûkt yn RF- en mikrogolfsystemen en hat de folgjende funksjes: trije input / output havens. De 3-wei macht dividers / kombiner hat trije ynfier havens dy't kin ûntfange sinjalen út ferskate boarnen, of berikke macht distribúsje en skieding.
1.Balâns en gearhing: It ûntwerp fan 'e 3-wei-krêftdeler is basearre op it prinsipe fan lykwicht en gearhing om de amplitude- en faze-kenmerken fan it ynfiersinjaal te behâlden.
2.Breidbânprestaasjes: 3-wei-power dividers hawwe typysk in breed bestjoeringsfrekwinsjeberik en kinne meardere frekwinsjebanden yn RF- en mikrogolfsystemen dekke.
3.Low ynfoegje ferlies: 3-way macht dividers / kombiners hawwe typysk lege ynfoegje ferlies, garandearje minimaal ferlies as it sinjaal wurdt oerdroegen fan de ynfier nei de útfier.
4. Hege macht tolerânsje: Om't se binne ûntwurpen mei hege macht applikaasjes yn gedachten, 3-way macht dividers / kombiners binne oer it algemien by steat om te wjerstean hegere macht nivo sûnder skea of ferfoarming.
5. Miniaturisaasje en yntegraasje: Moderne 3-way power dividers brûke faaks miniaturisearre ferpakkings- en yntegraasjetechniken, wêrtroch't se lyts, lichtgewicht en yn steat binne fan strakke yntegraasje mei oare RF- en mikrofoave-apparaten.
1. Brûkt yn antenne systemen te fersprieden de sinjalen útfier troch de antenne oan trije of mear ûntfangers;
2. Brûkt foar macht allocation, distribúsje input sinjaal macht oan meardere útfier paden, lykas macht fersterker arrays;
3. Brûkt yn mixer circuits te mix trije ynfier sinjalen yn ien útfier sinjaal;
4. Brûkt foar testen fan systemen, dielen fan ynfiersinjalen yn trije kanalen foar it mjitten en fergelykjen fan sinjaalprestaasjes, lykas macht, faze en frekwinsje;
5. Wurdt brûkt yn radar systemen foar in allocate sinjalen ûntfongen troch de radar oan trije of mear analyzers foar it analysearjen en it bepalen fan de posysje en snelheid fan doelen.
Qualwaveleveret 3-way power dividers / kombinatoren fan DC oant 67GHz, en de krêft is oant 300W.
Part Number | RF Frekwinsje(GHz, min.) | RF Frekwinsje(GHz, Max.) | Macht as Divider(W) | Power as Combiner(W) | Insertion Loss(dB, Max.) | Isolaasje(dB, min.) | Amplitude Balâns(± dB, max.) | Fase Balâns(±°,Max.) | VSWR(Max.) | Connectors | Trochrintiid(wiken) |
---|---|---|---|---|---|---|---|---|---|---|---|
QPD3-0-8000-2 | DC | 8 | 2 | - | 11 | 9 | ±0,8 | 12 | 1.8 | SMA, N | 2~3 |
QPD3-0-26500-2-S | DC | 26.5 | 2 | - | 3 (typ.) | 9 (typ.) | ±1,3 | ±8 | 2 (typ.) | SMA | 2~3 |
QPD3-0-40000-2-K | DC | 40 | 2 | - | 3 (typ.) | 9 (typ.) | ±1,3 | ±8 | 2 (typ.) | 2,92 mm | 2~3 |
QPD3-0-50000-2-2 | DC | 50 | 2 | - | 3 (typ.) | 9 (typ.) | ±1,3 | ±8 | 2 (typ.) | 2,4 mm | 2~3 |
QPD3-0-67000-2-V | DC | 67 | 2 | - | 3 (typ.) | 9 (typ.) | ±1,3 | ±8 | 2 (typ.) | 1,85 mm | 2~3 |
QPD3-1-300-1-S | 0.001 | 0.3 | 1 | - | 1 | 20 | ±0,4 | ±4 | 1.35 | SMA | 2~3 |
QPD3-5-50-50-S | 0.005 | 0.05 | 50 | 50 | 0.6 | 15 | 0.3 | 2 | 1.35 | SMA | 2~3 |
QPD3-5-1000-50-S | 0.005 | 1 | 50 | 50 | 1 | 12 | 0.3 | 5 | 1.5 | SMA | 2~3 |
QPD3-10-500-1-S | 0.01 | 0.5 | 1 | 0.15 | 1.4 | 16 | 0.6 | ±6 | 1.6 | SMA | 2~3 |
QPD3-80-300-20-S | 0.08 | 0.3 | 20 | 1 | 1 | 18 | 0.4 | ±5 | 1.3 | SMA | 2~3 |
QPD3-100-200-K1-N | 0.1 | 0.2 | 100 | 10 | 0.5 | 18 | ±0,3 | ±3 | 1.25 | N | 2~3 |
QPD3-100-350-30-S | 0.1 | 0,35 | 30 | 2 | 0.8 | 20 | ±0,4 | ±4 | 1.25 | SMA | 2~3 |
QPD3-100-400-30-N | 0.1 | 0.4 | 30 | 2 | 0.6 | 18 | 0.5 | ±5 | 1.3 | N | 2~3 |
QPD3-100-400-50 | 0.1 | 0.4 | 50 | 5 | 0.6 | 18 | 0.6 | ±5 | 1.3 | N | 2~3 |
QPD3-100-800-1-S | 0.1 | 0.8 | 1 | 1 | 1.5 | 20 | 0.4 | ±5 | 1.35 | SMA | 2~3 |
QPD3-100-1000-30-S | 0.1 | 1 | 30 | 2 | 1.8 | 18 | 0.8 | ±8 | 1.35 | SMA | 2~3 |
QPD3-114-178-K3-N | 0.114 | 0.178 | 300 | 50 | 1 | 20 | 0.5 | ±6 | 1.3 | N | 2~3 |
QPD3-134-3700-30-N | 0.134 | 3.7 | 30 | 2 | 3.8 | 18 | 0.9 | ±10 | 1.5 | N | 2~3 |
QPD3-136-174-K3-N | 0.136 | 0.174 | 300 | 20 | 0.8 | 20 | ±0,3 | ±3 | 1.25 | N | 2~3 |
QPD3-138-960-50-N | 0.138 | 0.96 | 50 | 3 | 1.2 | 18 | ±0,6 | ±6 | 1.3 | N | 2~3 |
QPD3-200-250-30-S | 0.2 | 0.25 | 30 | 2 | 1 | 20 | 0.4 | ±4 | 1.25 | SMA | 2~3 |
QPD3-200-2000-30-S | 0.2 | 2 | 30 | 2 | 1.8 | 20 | 0.8 | ±8 | 1.3 | SMA | 2~3 |
QPD3-225-2500-20-S | 0.225 | 2.5 | 20 | 1 | 1.8 | 20 | 0.8 | ±8 | 1.4 | SMA | 2~3 |
QPD3-336-366-30-N | 0.336 | 0.366 | 30 | 2 | 0.6 | 20 | 0.3 | ±3 | 1.25 | N | 2~3 |
QPD3-380-470-K3-N | 0.38 | 0.47 | 300 | 20 | 0.8 | 20 | ±0,3 | ±3 | 1.25 | N | 2~3 |
QPD3-380-3800-10-N | 0.38 | 3.8 | 10 | 1 | 2 | 18 | ±0,8 | ±8 | 1.5 | N | 2~3 |
QPD3-380-40000-20-K | 0.38 | 40 | 20 | - | 4.5 | 17 | ±0,9 | ±10 | 1.7 | 2,92 mm | 2~3 |
QPD3-400-1000-30-S | 0.4 | 1 | 30 | 2 | 0.6 | 20 | 0.4 | ±5 | 1.3 | SMA | 2~3 |
QPD3-400-2000-30-S | 0.4 | 2 | 30 | - | 1.8 | 20 | ±0,8 | ±10 | 1.3 | SMA | 2~3 |
QPD3-400-6000-20 | 0.4 | 6 | 20 | 1 | 2.8 | 18 | 0.8 | ±8 | 1.5 | SMA, N | 2~3 |
QPD3-433-30-N | 0.433 | 30 | 2 | 0.5 | 22 | 0.3 | ±3 | 1.2 | N | 2~3 | |
QPD3-440-900-60-N | 0.44 | 0.9 | 60 | 3 | 1 | 18 | 0.5 | ±6 | 1.35 | N | 2~3 |
QPD3-480-500-30-N | 0.48 | 0.5 | 30 | 2 | 0.3 | 20 | ±0,3 | ±3 | 1.2 | N | 2~3 |
QPD3-480-500-50-N | 0.48 | 0.5 | 50 | 3 | 0.3 | 20 | ±0,3 | ±3 | 1.2 | N | 2~3 |
QPD3-500-700-K15-S | 0.5 | 0.7 | 150 | 20 | 0.6 | 18 | 0.5 | ±6 | 1.3 | SMA | 2~3 |
QPD3-500-3000-30-S | 0.5 | 3 | 30 | 2 | 1 | 18 | 0.5 | ±5 | 1.3 | SMA | 2~3 |
QPD3-500-6000-30 | 0.5 | 6 | 30 | 2 | 2.8 | 18 | 0.8 | ±8 | 1.5 | SMA, N | 2~3 |
QPD3-500-6000-K3-4 | 0.5 | 6 | 300 | - | 1.2 | 12 | ±0,5 | ±5 | 1.6 | 4.3-10 | 2~3 |
QPD3-500-8000-20-S | 0.5 | 8 | 20 | 2 | 2.2 | 17 | 1 | ±10 | 1.5 | SMA | 2~3 |
QPD3-500-18000-30-S | 0.5 | 18 | 30 | 5 | 2.1 | 18 | ±0,5 | ±5 | 1.45 | SMA | 2~3 |
QPD3-500-26500-30-S | 0.5 | 26.5 | 30 | 2 | 3 | 18 | ±0,6 | ±5 | 1.6 | SMA | 2~3 |
QPD3-500-40000-20-K | 0.5 | 40 | 20 | 2 | 4.3 | 18 | ±0,8 | ±9 | 1.7 | 2,92 mm | 2~3 |
QPD3-555-3400-30-N | 0.555 | 3.4 | 30 | 2 | 1 | 20 | ±0,7 | ±7 | 1.25 | N | 2~3 |
QPD3-600-6000-30 | 0.6 | 6 | 30 | 2 | 2.8 | 20 | ±0,8 | ±8 | 1.5 | SMA, N | 2~3 |
QPD3-698-2700-30-N | 0.698 | 2.7 | 30 | 2 | 0.6 | 20 | ±0,4 | ±4 | 1.3 | N | 2~3 |
QPD3-698-6000-30-N | 0.698 | 6 | 30 | 2 | 2 | 18 | 0.8 | ±8 | 1.5 | N | 2~3 |
QPD3-700-1100-10-S | 0.7 | 1.1 | 10 | - | 1 | 20 | ±0,6 | - | 1.35 | SMA | 2~3 |
QPD3-700-4000-30 | 0.7 | 4 | 30 | 2 | 1.4 | 20 | ±0,8 | ±8 | 1.3 | SMA, N | 2~3 |
QPD3-700-5000-30-N | 0.7 | 5 | 30 | 2 | 1.5 | 18 | ±0,8 | ±8 | 1.4 | N | 2~3 |
QPD3-800-1600-30-S | 0.8 | 1.6 | 30 | 2 | 0.6 | 20 | ±0,4 | ±4 | 1.3 | SMA | 2~3 |
QPD3-800-2500-K2-7 | 0.8 | 2.5 | 200 | - | 0.5 | 20 | 0.3 | 4 | 1.2 | 7/16 DIN | 2~3 |
QPD3-1000-2000-30-S | 1 | 2 | 30 | 2 | 0.8 | 20 | ±0,4 | ±4 | 1.25 | SMA | 2~3 |
QPD3-1000-3000-30-N | 1 | 3 | 30 | 2 | 1.2 | 20 | ±0,5 | ±5 | 1.3 | N | 2~3 |
QPD3-1000-18000-20-S | 1 | 18 | 20 | 0.5 | 1.5 | 17 | ±0,8 | ±7 | 1.7 | SMA | 2~3 |
QPD3-1000-26500-30-S | 1 | 26.5 | 30 | 2 | 2.1 | 16 | ±0,8 | ±7 | 1.7 | SMA | 2~3 |
QPD3-1100-1700-30 | 1.1 | 1.7 | 30 | 2 | 0.5 | 20 | 0.4 | ±4 | 1.25 | SMA, TNC | 2~3 |
QPD3-1500-6200-K15-N | 1.5 | 6.2 | 150 | 150 | 1 | 15 | ±0,5 | ±5 | 1.5 | N | 2~3 |
QPD3-2000-3000-20-S | 2 | 3 | 20 | 1 | 0.5 | 18 | 0.5 | ±5 | 1.3 | SMA | 2~3 |
QPD3-2000-4000-20-S | 2 | 4 | 20 | 1 | 0.6 | 20 | 0.3 | ±5 | 1.3 | SMA | 2~3 |
QPD3-2000-8000-20 | 2 | 8 | 20 | 1 | 1.2 | 18 | 0.5 | ±6 | 1.4 | SMA, N | 2~3 |
QPD3-2000-9000-30-S | 2 | 9 | 30 | 2 | 1.5 | 18 | ±0,5 | ±5 | 1.5 | SMA | 2~3 |
QPD3-2000-18000-20-S | 2 | 18 | 20 | 1 | 1.6 | 16 | 0.6 | ±10 | 1.7 | SMA | 2~3 |
QPD3-2000-26500-30-S | 2 | 26.5 | 30 | 2 | 2 | 17 | ±0,7 | ±7 | 1.6 | SMA | 2~3 |
QPD3-2100-8400-20-N | 2.1 | 8.4 | 20 | 1 | 1.6 | 18 | 0.6 | ±6 | 1.15 | N | 2~3 |
QPD3-3400-3800-30-N | 3.4 | 3.8 | 30 | 2 | 0.5 | 20 | ±0,5 | ±5 | 1.25 | N | 2~3 |
QPD3-4950-4970-20-S | 4.95 | 4.97 | 20 | 1 | 0.5 | 20 | ±0,4 | ±4 | 1.25 | SMA | 2~3 |
QPD3-6000-10000-20-S | 6 | 10 | 20 | 1 | 1.2 | 18 | 0.6 | ±6 | 1.5 | SMA | 2~3 |
QPD3-6000-18000-20-S | 6 | 18 | 20 | 1 | 1.2 | 18 | 0.6 | ±6 | 1.5 | SMA | 2~3 |
QPD3-6000-26500-30-S | 6 | 26.5 | 30 | 2 | 1.4 | 18 | ±0,6 | ±7 | 1.6 | SMA | 2~3 |
QPD3-6000-40000-20-K | 6 | 40 | 20 | 2 | 1.8 | 18 | ±0,8 | ±9 | 1.7 | 2,92 mm | 2~3 |
QPD3-6000-50000-20-2 | 6 | 50 | 20 | 1 | 2.4 | 18 | ±0,9 | ±11 | 1.8 | 2,4 mm | 2~3 |
QPD3-7000-8000-20-S | 7 | 8 | 20 | 1 | 1 | 20 | 0.4 | ±4 | 1.3 | SMA | 2~3 |
QPD3-8000-12000-20-S | 8 | 12 | 20 | 1 | 1 | 18 | 0.5 | ±5 | 1.4 | SMA | 2~3 |
QPD3-9000-11000-20-S | 9 | 11 | 20 | 1 | 0.8 | 18 | 0.5 | ±5 | 1.4 | SMA | 2~3 |
QPD3-12000-13000-60-S | 12 | 13 | 60 | 60 | 0.8 | 20 | ±0,3 | ±4 | 1.4 | SMA | 2~3 |
QPD3-16000-18000-20-S | 16 | 18 | 20 | 1 | 0.8 | 18 | 0.5 | ±5 | 1.4 | SMA | 2~3 |
QPD3-17000-32000-20-K | 17 | 32 | 20 | 1 | 2 | 15 | 0.8 | ±10 | 1.8 | 2,92 mm | 2~3 |
QPD3-18000-26500-30-S | 18 | 26.5 | 30 | 2 | 1.4 | 18 | ±0,5 | ±6 | 1.6 | SMA | 2~3 |
QPD3-18000-40000-20-K | 18 | 40 | 20 | 2 | 1.8 | 18 | ±0,7 | ±8 | 1.7 | 2,92 mm | 2~3 |
QPD3-18000-50000-20-2 | 18 | 50 | 20 | 1 | 2.4 | 18 | ±0,9 | ±11 | 1.8 | 2,4 mm | 2~3 |
QPD3-24000-44000-20-2 | 24 | 44 | 20 | 1 | 2 | 20 | ±0,8 | ±9 | 1.7 | 2,4 mm | 2~3 |
QPD3-26000-31000-20-K | 26 | 31 | 20 | 1 | 1.5 | 16 | 0.6 | ±6 | 1.5 | 2,92 mm | 2~3 |
QPD3-26500-40000-20-K | 26.5 | 40 | 20 | 2 | 1.8 | 18 | ±0,6 | ±7 | 1.7 | 2,92 mm | 2~3 |
QPD3-26500-50000-20-2 | 26.5 | 50 | 20 | 1 | 2.4 | 18 | ±0,8 | ±10 | 1.8 | 2,4 mm | 2~3 |